How to Replace Mirror 01-06 Chrysler Sebring
Difficulty: Intermediate · About 40 min · Chrysler Sebring
Replace the side mirror on a 2001–2006 Chrysler Sebring by removing the door panel, transferring the mirror-base trim, and reconnecting the mirror harness and door wiring.
Tools you will need
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- Putty Knife
- 8mm Socket
- Door Panel Removal Tool
- Ratchet
Parts and supplies
- Side mirror assembly
Steps
Remove the door panel
Switch off the ignition. Release the door-pull and handle trim and remove the Phillips screws, then free the panel clips and lift the panel away. Disconnect the handle rod and door wiring, and set the panel aside safely.
Remove the original mirror
Release the mirror-base trim and unplug the mirror harness. Remove the two 8 mm mounting nuts and the remaining 8 mm bolt, then guide the mirror out of the door.
Install the replacement mirror
Seat the replacement mirror in the door opening and start the mounting bolt and two nuts by hand. Tighten them securely and reconnect the mirror electrical harness.
Reinstall the door panel and test
Reconnect the door handle rod and wiring harnesses, position the panel, and press its clips into place. Reinstall the panel screws and trim, then test mirror adjustment and door functions before closing the door.
Check your vehicle’s repair manual for exact specifications and fit.