How to Remove Front Door Speakers 10-16 Cadillac SRX

Difficulty: Intermediate · About 45 min · Cadillac Srx

Remove and reinstall a front door speaker on a 2010–2016 Cadillac SRX by releasing the door panel and reconnecting the speaker and switch harnesses.

Steps

1. Remove the door panel

   Release the master switch panel and unplug its connectors. Remove the door panel screws, free the perimeter clips, and lift the panel enough to unhook the handle cable and remaining switch plug.

2. Remove the old speaker

   Unplug the speaker connector and remove its 7mm mounting fasteners. Use a trim tool to release the speaker from the door opening.

3. Install the replacement speaker

   Position the speaker in the opening and reinstall its 7mm fasteners. Reconnect the speaker harness and confirm the connector lock is engaged.

4. Reinstall the door panel

   Reconnect the door handle cable and switch harnesses, then align the panel and press its clips into place. Reinstall its screws and press the master switch panel into the door.

5. Test audio and controls

   Play audio at a low level and confirm the speaker operates without rattling. Test the window switch and handle before closing the door.

Check your vehicle’s repair manual for exact specifications and fit.