How to Change Oil 01-05 Honda Civic
Difficulty: Beginner · About 60 min · Honda Civic
Change the engine oil and filter on a 2001–2005 Honda Civic, using the specified oil grade and quantity and checking the filter seal, drain plug, and dipstick after startup.
Tools you will need
- Funnel
- Oil Filter Wrench
- Torque Wrench
- 16mm Socket
- Jack Stands
- Drain Pan
- Ratchet
- Cloth Rags
- Floor Jack
Parts and supplies
- Engine oil
- Oil filter
- Drain-plug seal
Steps
- Drain the oil safely
Warm the engine briefly, switch it off, and let hot components cool enough to handle. Raise the vehicle at approved points, support it on jack stands, place a drain pan beneath the oil pan, and remove the drain plug.
- Remove the old oil filter
Loosen the filter with an oil-filter wrench and let it drain into the pan. Wipe the mounting surface clean and make sure the old gasket has not stuck to the engine.
- Install the new filter and drain plug
Lubricate the new filter gasket with fresh oil and thread the filter on by hand. Reinstall the drain plug with a sound seal and tighten it to the vehicle specification.
- Refill and verify the level
Lower the vehicle and add the specified oil through a funnel, starting below the full capacity. Start the engine until oil pressure is established, inspect for leaks, shut it off, let the oil settle, and confirm the dipstick level is in range.
Check your vehicle’s repair manual for exact specifications and fit.