How to Replace Side View Mirrors 01-06 Dodge Stratus
Difficulty: Intermediate · About 40 min · Dodge Stratus
Replace a side-view mirror on a 2001–2006 Dodge Stratus by removing the door panel and disconnecting the mirror harness before releasing its fasteners.
Tools you will need
- Flat blade screwdriver
- Phillips screwdriver
- 8 mm socket and ratchet
- Door-panel trim tool
Parts and supplies
- Compatible side-view mirror
Steps
Remove the door-panel trim
Switch off the ignition and lift the small covers from the pull cup and handle. Remove their screws and the outer panel fasteners, then release the clips around the panel edge.
Disconnect the panel
Lift the panel from the window ledge and disconnect the handle rod and electrical plugs. Place the panel somewhere protected so its wiring and finish are not damaged.
Remove and replace the mirror
Unplug the mirror connector and support the mirror from outside while removing its mounting hardware. Feed the replacement harness through the door, seat the mirror, and secure it evenly.
Reassemble the door
Reconnect the mirror and panel harnesses and the handle rod. Align the panel over the lock tab, press its clips in, and reinstall all screws and trim covers.
Test the repair
Test power adjustment and any other equipped mirror feature. Confirm the handle, switches, and door panel all work before closing the door.
Check your vehicle’s repair manual for exact specifications and fit.