How To Install Replace Rear Inside Door Handle Honda Accord 94-97 1AAuto.com

Difficulty: Beginner · About 30 min · Honda Accord

Replace the rear interior door handle on a 1994–1997 Honda Accord by disconnecting the lock rod and window switch, then transferring the hardware.

Steps

1. Release the old handle

   Remove the Phillips screw and slide the handle forward out of its opening. Release the lock rod clip and lift the rod from the handle, then unplug the power window switch connector.

2. Transfer the hardware

   Move the required screw or trim hardware from the old handle to the replacement. Check that the replacement has the same mounting points and connector arrangement.

3. Fit the replacement handle

   Reconnect the window switch and place the lock rod into its clip. Rotate the clip over the rod to retain it, slide the handle into position, and reinstall its Phillips screw.

4. Test the handle

   Operate the handle and lock to verify the rod moves freely and the latch releases. Confirm the window switch connector is secure before finishing the panel installation.

Check your vehicle’s repair manual for exact specifications and fit.