How to Replace Rear Door Latch 09-14 Ford F-150

Difficulty: Intermediate · About 90 min · Ford F-150

Replace the rear door latch on a 2009–2014 Ford F-150 and verify the lock, handle, and electrical functions before reinstalling trim.

Steps

1. Remove the rear door panel

   Release the handle bolt cover and upper window trim, remove the handle and perimeter fasteners, then unplug the window switch. Lift the panel off its mounts, disconnect the latch cable, and set the panel aside.

2. Access and remove the latch

   Peel the vapor barrier carefully and unplug the latch connector. Release the handle rod clip and cable, remove the latch bolts, then loosen the window regulator mounts enough to move the regulator aside and withdraw the latch and lock rod.

3. Install the replacement latch

   Transfer the lock rod and guide the latch into the door with the rod exiting through its original opening. Reconnect the handle cable, secure the latch fasteners to the vehicle specification, reconnect the rod and electrical plug, and restore the regulator mounts.

4. Test and reinstall the panel

   With the door open, test the interior and exterior handles, lock, and electrical release as equipped. Restore the vapor barrier, reconnect the panel latch cable and switch, hang and clip the panel, then reinstall the fasteners and trim.

Check your vehicle’s repair manual for exact specifications and fit.