How To Replace Alternator Fan Belt 00-04 Subaru Outback
Difficulty: Intermediate · About 25 min · Subaru Outback
Replace the alternator fan belt on a 2000-2004 Subaru Outback.
Tools you will need
- 12mm socket
- Socket extensions
- 10mm socket
- Ratchet
Parts and supplies
- Alternator fan belt
Steps
- Remove the old belt
Remove the shield's two 10mm bolts and the alternator's 12mm bolt, remove the shield, remove the 12mm bolt below the adjusting bolt, loosen the adjusting bolt, then pull the belt off the alternator.
- Install the new belt
Familiarize yourself with the belt's routing, fit it into place following the diagram, tighten the adjusting bolt until the belt has about 1/4 inch of play up and down, tighten the 12mm bolt below it, refit the shield, then insert the alternator's 12mm bolt and the shield's two 10mm bolts.
Check your vehicle’s repair manual for exact specifications and fit.