How to Replace Ambient Outside Temperature Sensor 06-11 Toyota Camry

Difficulty: Intermediate · About 60 min · Toyota Camry

Replace the outside air temperature sensor on a 2006–2011 Toyota Camry by removing the front bumper cover, swapping the sensor, and checking the display.

Steps

1. Protect and free the bumper cover

   Park on level ground and apply painter's tape along the bumper-to-fender seams to mark alignment and protect the paint. Remove the lower splash-shield fasteners, release the wheel-liner retainers, and remove the bumper bolts at both sides and along the upper support.

2. Remove the bumper cover

   Release the plastic retainers at the headlamp edges and the Phillips retainers on the support brackets. With a helper supporting the cover, pull its corners outward from the fenders and ease it forward without catching the wiring or scratching the paint.

3. Replace the ambient temperature sensor

   Locate the sensor clipped to the radiator support. Release its retaining pin, unplug the electrical connector, and remove the old sensor. Connect the replacement and press it into the support until the retainer holds it securely.

4. Reinstall and check the bumper

   Align the cover with the taped marks and upper brackets, then seat both sides in their fender guides. Reinstall the retainers and fasteners, followed by the splash shields and liners. Start the vehicle and confirm the outside-temperature display responds normally.

Check your vehicle’s repair manual for exact specifications and fit.