How to Remove Front Bumper 97-05 Lexus GS300
Difficulty: Beginner · About 3 min · Lexus Gs300
Remove and reinstall the front bumper cover on a 1997–2005 Lexus GS300 to reach components behind it, protecting the paint and reconnecting exterior lamp wiring.
Tools you will need
- 10mm Socket
- Plastic Fastener Remover
- Ratchet
Steps
Release the bumper fasteners
Park on a level surface and protect painted edges with masking material. Remove the lower and upper bumper fasteners, then release the corner screws at both fenders.
Disconnect lamps and lift the cover away
Pull back the corner splash shields and unplug fog and side-marker connectors on both sides. With a helper supporting the cover, release it from its side guides and set it on a padded surface.
Position and reconnect the bumper
Bring the cover back to the vehicle and engage its side guides evenly. Reconnect each lamp connector, checking that the wires are routed clear of mounting edges.
Secure and inspect the cover
Install the top, corner, and lower fasteners in their original locations. Refit the splash shielding and check panel gaps, lamp operation, and that no harness is pinched.
Check your vehicle’s repair manual for exact specifications and fit.