How to Replace Inside Door Handle 98-02 Mercury Grand Marquis

Difficulty: Beginner · About 35 min · Mercury Grand Marquis

Replace an interior door handle on a Mercury Grand Marquis while preserving the lock and switch connections and restoring the water shield.

Steps

1. Remove the door panel

   Release the window switch and handle trim, remove the panel screws, and unplug the switches. Lift the panel away and disconnect the lock wiring and trunk switch.

2. Remove the old handle

   Remove the speaker and junction block for access, then peel back the water shield. Remove the handle fastener, slide the handle forward, and free it from the latch rod.

3. Install the replacement handle

   Connect the latch rod to the new handle, slide it into position, and install its retaining screw. Restore the water shield and reinstall the junction block and speaker.

4. Reassemble and test

   Reconnect the trunk and lock switches, align the door panel with its clips, and reinstall its fasteners. Check the inside handle, lock, and window switch before closing the door.

Check your vehicle’s repair manual for exact specifications and fit.