How to Replace Rear Shock 00-07 Ford Focus
Difficulty: Intermediate · About 45 min · Ford Focus
Replace a rear shock on a Ford Focus, opening the interior access trim and supporting the suspension while aligning the lower mount.
Tools you will need
- 13mm Socket
- 15mm Socket
- 17mm Socket
- Ratchet
- Jack Stands
Parts and supplies
- Rear shock absorber
Steps
Open the upper mount access
Fold back the cargo trim and insulation to expose the upper shock mount. Remove its retaining nut while counterholding the shaft if it turns.
Remove the old shock
Support the suspension as needed, remove the lower mounting bolt, and withdraw the shock from below. Transfer the boot or bushing only if the replacement requires it.
Install the replacement shock
Assemble the lower washer and bushing in the correct order, position the shock, and align its lower eye with the bracket. Install the bolt, then refit the upper bushing, washer, and nut.
Restore the interior trim
Tighten the upper and lower mounts to vehicle specifications with the suspension at the required ride height. Refit the insulation and cargo trim, then check both sides for secure hardware.
Check your vehicle’s repair manual for exact specifications and fit.