How to Replace Master Power Window Switch 94-96 Toyota Camry
Difficulty: Intermediate · About 45 min · Toyota Camry
Replace the master power window switch on a 1994–1996 Toyota Camry by removing the door panel, transferring its bracket and bezel, and reconnecting the harness.
Tools you will need
- Flat blade screwdriver
- Phillips screwdriver
Parts and supplies
- Master power window switch
Steps
Remove the door panel
Release the mirror base and handle trim and remove the panel screws and covers. Free the rear pins and lower panel edge, lift the panel away, and unplug the master switch and tweeter if equipped.
Remove the old switch
Remove the bracket screw and take off the bracket. Withdraw the switch, remove its retaining screw, and release the bezel tabs to separate the bezel from the switch.
Install the replacement switch
Clip the bezel onto the new switch and reinstall its retaining screw. Position the switch in the door panel, refit the bracket, and secure it with its fasteners.
Reconnect and reinstall the panel
Reconnect the master switch and tweeter wiring, then position the panel and press its clips into place. Reinstall the screws, mirror trim, screw covers, and handle bezel.
Test window operation
Operate each window from the master switch and confirm the panel is secure. Verify the tweeter remains connected if equipped.
Check your vehicle’s repair manual for exact specifications and fit.