How to Replace Inside Door Handle 04-08 Nissan Maxima
Difficulty: Intermediate · About 55 min · Nissan Maxima
Replace the inside door handle on a 2004–2008 Nissan Maxima by releasing the door panel, transferring the latch cables, and checking the handle before final reassembly.
Tools you will need
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- Putty Knife
- 10mm Socket
- Door Panel Removal Tool
- Ratchet
Parts and supplies
- Interior door handle
Steps
Remove the door panel
Pry off the handle and switch trim, disconnect the wiring, and remove the bolts inside the pull and handle. Release the panel clips, lift the panel away, then disconnect the latch cables and remaining wiring.
Remove the old handle
Remove the four Phillips screws behind the handle. Press its retaining tabs and pull the handle from the panel, then remove the bezel.
Install the replacement handle
Seat the replacement handle in the panel and secure it with its four screws. Refit the bezel and confirm the handle pivots freely before reconnecting the latch cables.
Reassemble the door
Reconnect the latch cables and wiring, then position the panel and press its clips into place. Reinstall the pull bolts, switch connections, handle fastener, and trim, then check handle and lock operation.
Check your vehicle’s repair manual for exact specifications and fit.