How to Replace Side Marker Light 00-05 Dodge Neon
Difficulty: Intermediate · About 3 min · Dodge Neon
Replace a side marker light on a 2000–2005 Dodge Neon by removing the headlamp for access, transferring the bulb, and checking the marker and headlamp operation afterward.
Tools you will need
- Flat Blade Screwdriver
- 8mm Wrench
- 8mm Socket
- Ratchet
Parts and supplies
- Compatible side marker lamp, if housing is damaged
- Correct replacement bulb, if needed
Steps
Remove the headlamp assembly
Switch the lights off and remove the headlamp and hood-trim fasteners. Release the retaining clip, unplug the lamp harness, and set the assembly on a padded surface.
Remove the side marker
Withdraw the marker bulb and release the lamp's retaining clip. Slide the marker rearward from its guide and lift it away from the body.
Install the replacement marker
Transfer or replace the bulb as needed, then route it through the opening. Engage the marker in its front guide and secure the retaining clip.
Reinstall and test the lamps
Reconnect the headlamp harness, seat the assembly, and reinstall its fasteners and trim. Test the headlamp, turn signal, and side marker before driving.
Check your vehicle’s repair manual for exact specifications and fit.