How to Replace Serpentine Belt Tensioner 92-99 Lincoln Town Car

Difficulty: Intermediate · About 25 min · Lincoln Town Car

Replace the serpentine belt tensioner on a 1992-1999 Lincoln Town Car.

Steps

1. Disconnect the battery

   Use an 8mm wrench to disconnect the negative battery terminal.

2. Remove the serpentine belt

   Locate your belt routing diagram, use a 3/8-inch ratchet to release tension from the belt tensioner, remove the belt, then inspect it for excessive wear.

3. Remove the old tensioner

   Unbolt it with a 10mm socket and ratchet, then pull it free.

4. Install the new tensioner

   Bolt it in with the 10mm socket and ratchet, then torque it to about 20-25 ft-lb.

5. Reinstall the serpentine belt

   Following your routing diagram, route the belt around the pulleys, use the 3/8-inch ratchet to release tension and loop the belt over the last pulley, then reconnect the negative battery terminal.

Check your vehicle’s repair manual for exact specifications and fit.