How to Install Trail Ridge Plug & Play Tow Mirrors 14-16 Toyota Tundra
Difficulty: Intermediate · About 3 min · Toyota Tundra
Install plug-and-play tow mirrors on a 2014–2016 Toyota Tundra by removing the front door panel, connecting the factory harness, and checking mirror controls before reassembly.
Tools you will need
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- 10mm Socket
- Ratchet
- Trim Tool Set
Parts and supplies
- Compatible plug-and-play tow mirror assembly
Steps
Remove the door panel
Pry up the window switch and unplug it, then release the sail and handle trim. Remove the panel screws and clips, lift the panel away, and disconnect the latch cables.
Remove the original mirror
Unplug the mirror harness and support the mirror while removing its mounting nuts. Guide the mirror and connector out of the door without scratching the paint.
Install the tow mirror
Route the replacement harness through the factory opening and seat the mirror on its mount. Install and tighten the mounting nuts evenly, then connect the factory plug.
Reinstall the panel and test
Reconnect the latch cables and switch, align the panel, and press its clips into place. Reinstall the screws and trim, then test mirror adjustment, heating, and signal functions if equipped.
Check your vehicle’s repair manual for exact specifications and fit.