How to Replace Tail Light 02-04 Nissan Altima
Difficulty: Beginner · About 2 min · Nissan Altima
Replace a taillight assembly or bulbs on a 2002–2004 Nissan Altima by accessing the lamp from the trunk and confirming all rear light functions afterward.
Tools you will need
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- 8mm Socket
- Ratchet
Parts and supplies
- Compatible taillight assembly or correct bulbs
Steps
Access and remove the taillight
Open the trunk and release the liner clip behind the lamp. Pull the liner aside, unplug the harness, and remove the lamp retaining nuts.
Service bulbs or replace housing
Guide the lamp out while feeding its wiring through the body opening. Twist the bulb holders free to replace bulbs, or transfer them to the replacement housing.
Install the lamp
Feed the harness through the opening and seat the lamp on its locating studs. Reinstall the retaining nuts and reconnect the harness and wiring clips.
Refit liner and test
Return the trunk liner and its clip. Test running, brake, turn, and reverse lights as applicable before closing the trunk.
Check your vehicle’s repair manual for exact specifications and fit.