How to Replace Mirror 01-03 Chrysler PT Cruiser
Difficulty: Intermediate · About 40 min · Chrysler Pt Cruiser
Replace a side mirror on a 2001–2003 Chrysler PT Cruiser by removing the door panel, unplugging the mirror harness, and restoring the latch rod and wiring.
Tools you will need
- 8mm socket and ratchet
- 10mm socket and ratchet
- Phillips screwdriver
- Flat blade screwdriver
Parts and supplies
- Side view mirror
Steps
- Remove the door panel
Release the mirror-base trim and remove the two 10mm pull bolts and handle Phillips screw. Remove the panel screws, lift the panel off the sill, then unhook the latch rod and unplug the lock switch.
- Remove the old side mirror
Disconnect the mirror harness and remove the three 8mm mounting nuts. Support the mirror while feeding its wiring through the door opening.
- Install the replacement mirror
Route the new mirror harness through the door and seat the mirror on its gasket. Start all three 8mm nuts by hand, tighten them securely, and reconnect the harness.
- Reassemble and test the door
Reconnect the lock wiring and attach the latch rod. Align the panel on the door, press its clips in, and reinstall the screws and pull bolts; test the mirror and door lock.
Check your vehicle’s repair manual for exact specifications and fit.