How to Replace Master Window Switch 10-16 Cadillac SRX
Difficulty: Beginner · About 20 min · Cadillac Srx
Replace the master window switch and mirror switch on a 2010–2016 Cadillac SRX by releasing the switch panel and transferring the electrical connectors.
Tools you will need
- Trim tool
- Pick tool
Parts and supplies
- Master window switch or mirror switch
Steps
Lift the switch panel
Switch off the ignition and use a trim tool to raise the master switch panel from the door. Unplug the connectors by releasing their locks and set the panel on a protected surface.
Remove the failed switch
Press the retaining tabs on the affected switch from the back of the panel and lift it free. Note the connector position and inspect the plug for damage.
Install the replacement
Align the replacement switch with the panel opening and press it into place until its tabs engage. Reconnect the harness plugs and confirm each connector is locked.
Reinstall and test
Align the switch panel with the door opening and press it down evenly until retained. Turn on the ignition and test window and mirror controls before closing the door.
Check your vehicle’s repair manual for exact specifications and fit.