How to Replace Rear Brakes 13-18 Subaru Forester
Difficulty: Intermediate · About 65 min · Subaru Forester
Replace rear brake pads and rotors on a Subaru Forester, supporting the caliper and checking pedal feel before the vehicle is driven.
Tools you will need
- Floor Jack
- Jack Stands
- 14mm Socket
- Wire Brush
- Brake Parts Cleaner
- Torque Wrench
Parts and supplies
- Rear brake pads
- Rear brake rotors, if worn
Steps
Raise the vehicle and inspect
Loosen the wheel nuts while the vehicle is on the ground, raise and support it securely, then remove the wheel. Inspect pad wear and rotor faces.
Remove the caliper and rotor
Remove the caliper bolts and support the caliper so the hose is not stretched. Remove the pads and bracket, then slide the rotor off the hub.
Install replacement brake parts
Clean the hub and replacement rotor. Reinstall the bracket to vehicle-specific torque, retract the piston slowly, fit the pads, and refit the caliper.
Reassemble and test
Refit the wheel and tighten the lug nuts to specification in a crossing pattern. Pump the pedal until firm and confirm braking at low speed before normal driving.
Check your vehicle’s repair manual for exact specifications and fit.