How to Replace Under Car Splash Shield 07-11 Honda CR-V
Difficulty: Beginner · About 2 min · Honda Cr-v
Replace the under-car splash shield on a 2007–2011 Honda CR-V by removing perimeter clips and bolts, then checking the panel is secure and clear of tires.
Tools you will need
- 10mm Socket
- Ratchet
- Trim Tool Set
- Slip-Joint Pliers
Parts and supplies
- Compatible under-car splash shield
- Replacement clips, if damaged
Steps
Remove the old shield
Park on level ground and raise the vehicle only if needed, supporting it securely. Release the perimeter and wheel-well push pins, then remove the shield bolts.
Inspect mounting points
Lower the shield carefully and inspect its edges, clips, and mounting points. Replace broken retainers and clear debris from the panel area.
Fit the replacement shield
Position the shield in its original orientation and start the bolts by hand. Align the edges with the wheel-well liners before tightening the fasteners.
Secure and check clearance
Tighten the bolts and press the push pins fully into place. Verify the shield cannot sag or contact tires, steering parts, or exhaust components.
Check your vehicle’s repair manual for exact specifications and fit.