How to Replace Power Window Switch 97-01 Toyota Camry
Difficulty: Beginner · About 20 min · Toyota Camry
Replace the power window switch on a 1997–2001 Toyota Camry by releasing the switch panel, transferring the wiring, and securing the replacement with three screws.
Tools you will need
- Flat blade screwdriver
- No. 2 Phillips screwdriver
Parts and supplies
- Power window switch
Steps
- Remove the old window switch
Carefully pry the switch panel up with a flat blade tool and disconnect its electrical harness. Remove the three Phillips screws and lift the switch from the trim.
- Install the replacement switch
Position the new switch in the trim and install the three Phillips screws. Reconnect the harness and align the switch panel with its opening.
- Secure and test controls
Press the switch panel into the door until its retainers engage. Test each window function and confirm the switch remains firmly seated.
Check your vehicle’s repair manual for exact specifications and fit.