How to Replace Third Brake Light 01-06 Chrysler Sebring
Difficulty: Beginner · About 20 min · Chrysler Sebring
Replace the center high-mounted brake light assembly or bulb on a 2001–2006 Chrysler Sebring by removing the trunk-lid trim panel and checking brake-light operation.
Tools you will need
- 10mm Socket
- Ratchet
- Wire Cutters
Parts and supplies
- Third brake light assembly or bulb
Steps
Remove the trunk-lid trim panel
Open the trunk and release the trim-panel clips by lifting their centers first, then pulling the clips free. Move the trunk release handle through the panel opening and set the panel aside without stressing its cable.
Replace the bulb or lamp assembly
For a bulb-only repair, twist the socket out of the lamp, pull the bulb straight from its holder, and press in a matching replacement. For a complete lamp replacement, remove the two 10 mm retaining bolts and lower the assembly from the trunk lid.
Install and test the brake light
Seat the replacement assembly in the opening and reinstall its two bolts. Refit the bulb socket, then return the trunk trim and release handle to position and secure the clips. Have an assistant press the brake pedal while you confirm the center lamp illuminates.
Check your vehicle’s repair manual for exact specifications and fit.