How to Replace Front Brakes 02-06 Nissan Altima
Difficulty: Intermediate · About 55 min · Nissan Altima
Replace front brake pads and rotors on a Nissan Altima, supporting the caliper and confirming pedal feel before driving.
Tools you will need
- Floor Jack
- Jack Stands
- 14mm Socket
- Large C-Clamp
- Wire Brush
- Torque Wrench
Parts and supplies
- Front brake pads
- Front brake rotors, if worn
Steps
Lift and inspect the brakes
Loosen the wheel nuts on the ground, raise and support the vehicle, then remove the wheel. Inspect the pads and rotor surfaces for wear or damage.
Remove caliper and rotor
Push the pads back slightly, remove the caliper bolts, and support the caliper securely. Remove the bracket bolts and lift the rotor from the hub.
Install replacement parts
Clean the hub and replacement rotor, then refit the bracket to vehicle-specific torque. Retract the piston slowly, fit the pads, and reinstall the caliper.
Reassemble and check operation
Reinstall the wheel and tighten its fasteners to the vehicle specification in a crossing pattern. Pump the pedal until firm and perform a cautious low-speed brake check.
Check your vehicle’s repair manual for exact specifications and fit.