How to Replace Master Power Window Switch 07-11 Honda CR-V
Difficulty: Intermediate · About 60 min · Honda Cr-v
Replace the master power window switch on a 2007–2011 Honda CR-V by removing the door panel and armrest, changing the switch, and reconnecting the window harness.
Tools you will need
- Phillips screwdriver
- Flat blade screwdriver
- Needle nose pliers
- Trim panel tool
Parts and supplies
- Master power window switch
Steps
- Remove the front door panel
Release the mirror trim, handle and pull covers, and remove the exposed Phillips screws. Free the panel clips, lift the panel away, and unplug the window switch connector.
- Remove the armrest and switch
Remove the armrest and bracket screws, release the handle and armrest tabs, and lift the armrest from the panel. Remove the switch screws and take the old switch out.
- Install the new switch
Position the replacement switch and install its screws. Refit the armrest and door handle, engaging their retaining tabs before reinstalling the fasteners.
- Reassemble and verify windows
Reconnect the switch harness and seat the door handle into the panel. Align the panel, press its clips in, reinstall all screws and covers, then test each window control.
Check your vehicle’s repair manual for exact specifications and fit.