How to Check you Engine Fluids 14-19 Audi SQ5
Difficulty: Beginner · About 15 min · Audi Sq5
Check washer fluid, brake fluid, coolant, and the electronic engine oil display on a 2014–2019 Audi SQ5, observing cold-engine and level-ground precautions.
Tools you will need
- Windshield washer fluid
- Brake fluid
- Coolant
- Engine oil
Steps
- Check washer fluid
Open and support the hood, then inspect the washer reservoir. Add suitable windshield washer fluid as needed and secure its cap before lowering the hood.
- Inspect brake fluid
Check the reservoir level against its minimum and maximum marks. If the level is low or the fluid appears contaminated, investigate the cause and use only the specified brake fluid.
- Check coolant when cold
Wait until the engine is fully cool before opening the coolant reservoir. Confirm the fluid reaches the indicated range, top up with the approved coolant if needed, and secure the cap.
- Read the electronic oil level
Park on level ground and follow the vehicle display's oil-check procedure. Open the Car menu and view Oil Level, then add the recommended oil in small amounts and recheck the display if needed.
Check your vehicle’s repair manual for exact specifications and fit.