How to Replace Bumper Cover 10-14 Subaru Outback
Difficulty: Beginner · About 3 min · Subaru Outback
Replace the front bumper cover on a 2010–2014 Subaru Outback by releasing its push pins and side tabs, then reconnecting fog lamps and securing the cover evenly.
Tools you will need
- Plastic Fastener Remover
- Pocket Screwdriver
Parts and supplies
- Front bumper cover, if damaged
Steps
Remove the cover retainers
Switch off the vehicle and protect the painted edges. Remove the push-pin retainers across the top, lower edge, and wheel-well corners, keeping each group organized.
Release the cover
Twist out the fog-lamp bulbs or unplug their connectors as applicable. Pull each bumper corner outward to release the side locks, then support the center and lift the cover away.
Fit the replacement cover
Align the grille and cover with the vehicle, then engage the center and side locking tabs without forcing them. Check that the edges sit evenly in their guides.
Reconnect lamps and secure
Reconnect or reinstall the fog lamps, then refit the upper, corner, and lower retainers. Confirm the cover is secure and test the lamps before driving.
Check your vehicle’s repair manual for exact specifications and fit.