How to Replace Master Window Switch 06-11 Toyota Camry
Difficulty: Intermediate · About 50 min · Toyota Camry
Replace the master power window switch on a 2006–2011 Toyota Camry by removing the door panel, transferring the switch, and reconnecting the door latch cables and wiring.
Tools you will need
- Phillips screwdriver
- Trim panel tool
Parts and supplies
- Master power window switch
Steps
- Remove door panel and wiring
Release the courtesy light, handle, and grab-panel trim, then remove the exposed screws and clips. Lift the panel from its locating pins, unhook the latch cables, and disconnect the wiring harnesses.
- Remove the master switch
Remove the three Phillips screws from the back of the panel. Release the switch connector lock, unplug the wiring, and remove the switch from its mounting position.
- Install the replacement switch
Connect and lock the electrical plug on the new switch. Position the switch in the door panel and reinstall its three screws securely.
- Reassemble and test controls
Reconnect the latch cables and panel wiring, route the courtesy light connector through its opening, and seat the door panel on its locating pins. Refit screws and trim, then test all window switches.
Check your vehicle’s repair manual for exact specifications and fit.