How to Replace Tail Light 99-09 Ford Crown Victoria

Difficulty: Beginner · About 20 min · Ford Crown Victoria

Replace the tail light assembly on a 1999-2009 Ford Crown Victoria.

Steps

1. Remove the tail light assembly

   Twist off the plastic clip behind the light, pull off the side insulation panel and pull back the one behind the light, remove the three 11mm nuts on its back, then pull it forward.

2. Replace a bulb

   Twist out the socket, pull the bulb straight out, push the new one in, then twist the socket back in.

3. Install the new tail light assembly

   Twist the sockets into the new assembly, line it up and push it into place, replace the three 11mm nuts, refit the insulation panel, then twist the plastic clip back on.

Check your vehicle’s repair manual for exact specifications and fit.