How to Install Rear Door Speaker 03-08 Honda Pilot
Difficulty: Beginner · About 60 min · Honda Pilot
Replace a rear door speaker on a 2003–2008 Honda Pilot by removing the trim panel and transferring the speaker housing. Protect trim and check the window switch, latch, and speaker after reassembly.
Tools you will need
- Trim tool set
- Flat blade screwdriver
- Phillips head screwdriver
- Needle-nose pliers
Parts and supplies
- Rear door speaker
Steps
Remove the door panel
Pry up the window-switch trim and unplug it. Remove handle and armrest screws, release the latch rod and panel clips carefully, then lift the panel away.
Remove the old speaker
Remove the speaker screws and pull it forward. Disconnect its plug, release the housing tabs, and separate the speaker from its mounting frame.
Fit the replacement speaker
Transfer the housing if needed, connect the speaker plug, and seat the assembly in the door. Reinstall the screws and confirm the speaker is secure.
Reinstall and test the panel
Reconnect the latch rod and switch, align the panel clips, and reinstall the handle and armrest screws. Test the window switch, latch, and speaker before closing the door.
Check your vehicle’s repair manual for exact specifications and fit.