How to Replace Taillights 94-02 Dodge RAM 1500
Difficulty: Beginner · About 25 min · Dodge Ram 1500
Replace the rear taillights on a 1994–2002 Dodge Ram 1500 by removing the Torx fasteners, transferring bulb sockets, and securing the replacement lamps to the body.
Tools you will need
- T25 Torx driver
Parts and supplies
- Taillight assemblies
Steps
- Remove the original taillight
Remove the T25 screws holding the lamp and pull the assembly straight back from the body. Rotate each bulb socket counterclockwise to release it from the old housing.
- Transfer the bulb sockets
Move each serviceable bulb from its socket as needed and fit the sockets into the replacement lamp. Turn each holder clockwise until its retaining tabs lock.
- Mount the replacement taillight
Connect any required lamp harnesses and align the assembly with its mounting points. Press the lamp into place and reinstall its Torx screws without overtightening the housing.
- Check rear lamp functions
Test the tail, brake, reverse, and turn signal lights. Confirm the housing sits flush and the wiring is secure before closing the tailgate.
Check your vehicle’s repair manual for exact specifications and fit.