How to Replace Front Door Lock Cylinder & Housing 05-16 Toyota RAV4
Difficulty: Intermediate · About 30 min · Toyota Rav4
Replace the front door lock cylinder on a 2005–2016 Toyota RAV4 by accessing its retaining screw through the door edge and transferring the handle trim.
Tools you will need
- T30 driver
- Flat blade screwdriver
- Trim tool
Parts and supplies
- Front door lock cylinder
Steps
- Access the cylinder retainer
Open the door and remove the small access cap at its edge. Loosen the T30 retaining screw through the access opening without removing it unless the service procedure requires it.
- Remove the old cylinder
Carefully release the lock cylinder from the door handle and withdraw it. Detach the surrounding trim from the old cylinder without breaking its tabs.
- Transfer trim and install
Fit the handle trim onto the replacement cylinder and align the cylinder with the door opening. Seat it fully, then tighten the T30 retaining screw to secure the assembly.
- Refit the cap and test
Reinstall the access cap and test the key from both sides of the lock operation. Confirm the cylinder turns smoothly and the door lock responds correctly.
Check your vehicle’s repair manual for exact specifications and fit.