How to Perform Oil Change 06-11 Toyota Camry

Difficulty: Beginner · About 20 min · Toyota Camry

Perform an oil change on a 2006-2011 Toyota Camry.

Steps

1. Drain the old oil

   Raise the car and support it, remove the 14mm drain plug on the passenger side into a pan, let it drain, then reinstall and tighten the plug.

2. Remove the old filter

   Spin it off with an oil filter wrench and wipe the area clean.

3. Fit the new filter

   Coat its rim with a layer of fresh oil, then thread it into place.

4. Fill with fresh oil

   Fill the recommended amount through a funnel, replace the cap, start the engine briefly, then shut it off and check the level on the dipstick.

Check your vehicle’s repair manual for exact specifications and fit.