How to Replace Starter 2010-2019 Ford Taurus 3.5L V6
Difficulty: Moderate · About 90 min · Ford Taurus
Replace the starter mounted above the transmission on the 3.5L Ford Taurus shown. The air intake assembly is moved for access; disconnect the battery before working on the starter’s electrical connections.
Tools you will need
- 10mm socket
- 8mm socket
- ratchet
Parts and supplies
- Starter motor
Steps
Disconnect the battery
With the ignition off, use a 10mm socket to disconnect the negative battery terminal and secure it away from the post. This prevents accidental contact while handling the starter wiring.
Move the intake for access
Loosen the air intake tube clamp with an 8mm socket. Release the attached hose and airbox clips, disconnect the vacuum hose, and lift the intake assembly out carefully. Remove the upper access fasteners described for the vehicle to reach the starter.
Remove the starter
Locate the starter above the transmission. Support it as you remove its mounting bolts, then disconnect the electrical connections, noting their positions. Remove the starter from the engine bay.
Install and test
Connect the wiring to the replacement starter and mount it in the original position. Reinstall the access hardware and intake assembly, reconnect the negative battery terminal, and verify the engine cranks normally.
Check your vehicle’s repair manual for exact specifications and fit.