How to Replace Rear Hatch Lower Trim Panel 09-14 Nissan Murano

Difficulty: Beginner · About 25 min · Nissan Murano

Remove and reinstall the rear hatch lower trim panel on a 2009–2014 Nissan Murano to access hatch wiring or trim components.

Steps

1. Disconnect the cargo lamps

   Open and support the hatch, then release the cargo lamps from the trim with a trim tool. Unplug their connectors and move the wiring clear of the panel.

2. Release the lower trim panel

   Remove the four lower push retainers and release the grab handles. Work around the panel with a trim tool to disengage the remaining clips, then lift the trim away without pulling on the wires.

3. Reinstall and reconnect the trim

   Feed the lamp wiring through its openings and align the panel with the hatch. Press its perimeter clips into place, reinstall the lower retainers and grab handles, then reconnect and snap the cargo lamps into the trim.

4. Check panel and lamps

   Confirm every clip is engaged and the panel sits flush. Test both cargo lamps and verify the hatch opens and closes without catching the restored trim.

Check your vehicle’s repair manual for exact specifications and fit.