How To Replace Interior Door Handle 07-13 GMC Yukon Denali
Difficulty: Intermediate · About 60 min · Gmc Yukon Denali
Replace the interior door handle on a 2007–2013 GMC Yukon or Denali while preserving the moisture barrier and reconnecting the latch cables and switch wiring.
Tools you will need
- Socket Extensions
- Flat Blade Screwdriver
- Putty Knife
- 7mm Socket
- 10mm Socket
- Door Panel Removal Tool
- Ratchet
Parts and supplies
- Interior door handle assembly
Steps
Disconnect the battery
Disconnect the negative battery cable and secure it away from the terminal. This reduces the chance of an electrical short while unplugging door components.
Remove the door panel
Pry off the handle and pull trim covers, remove their fasteners, then lift the switch panel and unplug its connectors. Release the panel clips and lift the panel away from the window ledge.
Release the moisture barrier and cables
Carefully separate the water shield from the door without tearing it. Disconnect the latch cables from the handle and set the barrier aside so it can be resealed later.
Remove and replace the handle
Remove the handle fasteners and unplug its switch. Connect the switch to the replacement handle, seat the handle in the panel, and secure it with its mounting bolts.
Reinstall the door panel
Reconnect the latch cables and reseal the water shield around the door opening. Hang the panel, press its clips into place, reconnect the switch, and reinstall the trim and screws.
Reconnect and test
Reconnect the negative battery cable. Operate the interior handle, lock, and window switch several times to confirm the latch releases and all wiring works normally.
Check your vehicle’s repair manual for exact specifications and fit.