How to Replace Rear Brakes 02-10 Dodge Ram 1500
Difficulty: Intermediate · About 60 min · Dodge Ram
Replace rear brake pads and rotors on a Dodge Ram 1500, cleaning the hub and servicing the slides before checking pedal feel.
Tools you will need
- Floor Jack
- Jack Stands
- 21mm Socket
- 10mm Socket
- Wire Brush
- Torque Wrench
Parts and supplies
- Rear brake pads
- Rear brake rotors, if needed
Steps
Raise the truck and inspect
Loosen the lug nuts while the truck is on the ground, lift and support it securely, then remove the wheel. Inspect pad thickness and rotor condition.
Remove the caliper and rotor
Remove the caliper slide bolts and lift the caliper from its bracket. Support it safely, remove the bracket bolts, and slide the rotor off without damaging the studs.
Prepare and install the brakes
Brush scale from the hub and clean the rotor. Service the pad clips and slides, retract the piston gradually, then install the rotor, bracket, pads, and caliper to vehicle specifications.
Reinstall the wheel and test
Mount the wheel and torque the lug nuts to specification in a crossing pattern. Pump the pedal until firm and verify braking at low speed before normal driving.
Check your vehicle’s repair manual for exact specifications and fit.