How to Replace Front Brakes 09-10 Pontiac Vibe
Difficulty: Intermediate · About 60 min · Pontiac Vibe
Replace front brake pads and rotors on the Pontiac Vibe, keeping the caliper supported and checking for firm pedal feel before driving.
Tools you will need
- Floor Jack
- Jack Stands
- 14mm Socket
- Wire Brush
- Large C-Clamp
- Torque Wrench
Parts and supplies
- Front brake pads
- Front brake rotors, if worn
Steps
Raise the vehicle and inspect
Loosen the wheel fasteners while the car is on the ground, then lift and support it securely. Remove the wheel and check pad thickness and rotor condition.
Remove caliper and rotor
Remove the caliper fasteners and support the caliper without loading its hose. Take out the pads and bracket, then slide the rotor off the hub.
Fit the new braking parts
Clean the hub face and rotor, then seat the rotor and refit the bracket to the vehicle specification. Retract the piston carefully, install the pads, and reinstall the caliper.
Reassemble and test
Refit the wheel and tighten its fasteners in a crossing pattern to specification. Pump the pedal until firm and confirm braking at low speed in a clear area.
Check your vehicle’s repair manual for exact specifications and fit.