How to Replace Radiator Cooling Fan 97-01 Toyota Camry
Difficulty: Intermediate · About 25 min · Toyota Camry
Replace the radiator cooling fan on a 1997-2001 Toyota Camry.
Tools you will need
- Flat blade screwdriver
- 10mm socket
- Ratchet
- Needle-nose pliers
Parts and supplies
- Radiator cooling fan
Steps
- Remove the old cooling fan
Disconnect its electrical connector, remove its two 10mm bolts, then lift it up and out.
- Prepare the new cooling fan
Remove the motor plate's two 10mm bolts, slide the clips off the fan, squeeze the connector's clips with pliers and push it out, pry its retainer off with a flat blade screwdriver and slide it onto the new connector, press the connector into the fan, slide the clips back on, then tighten the motor plate onto the fan assembly.
- Install the new cooling fan
Insert the fan shroud into its pin retainers, tighten the two 10mm bolts, then connect the electrical connector.
Check your vehicle’s repair manual for exact specifications and fit.