How To Install and Replace Side Rear View Mirror 2000-2001 Nissan Altima
Difficulty: Beginner · About 20 min · Nissan Altima
Replace the side mirror on a 2000–2001 Nissan Altima by removing the inner triangular trim, unplugging the connector, and securing the replacement mirror with three nuts.
Tools you will need
- Socket Extensions
- Flat Blade Screwdriver
- 10mm Socket
- Ratchet
Parts and supplies
- Side rear view mirror assembly
Steps
Remove the mirror trim
Switch off the ignition and open the door. Carefully release the triangular panel beside the mirror and pull it straight out of its clips. Move the foam insulation aside to expose the mirror wiring and mounting nuts.
Disconnect and remove the old mirror
Unplug the mirror harness and support the mirror from outside the door. Remove the three 10 mm mounting nuts, then guide the mirror and its wiring out through the opening.
Install the replacement mirror
Feed the replacement harness through the opening and seat the mirror against the door. Reinstall and tighten the three nuts evenly, reconnect the harness, and return the foam insulation to its original position.
Refit trim and test adjustment
Align the triangular panel with its clips and press it into place. Turn on the ignition and test the mirror adjustment, checking that the mirror is secure and the panel is flush before closing the door.
Check your vehicle’s repair manual for exact specifications and fit.