How to Replace Window Regulator 01-05 Chrysler PT Cruiser
Difficulty: Intermediate · About 45 min · Chrysler Pt Cruiser
Replace a Chrysler PT Cruiser window regulator with the glass secured, then check full window travel before reinstalling the door panel.
Tools you will need
- 10mm Socket
- Ratchet
- Phillips Head Screwdriver
- Painter's Tape
Parts and supplies
- Window regulator
Steps
Remove the door panel
Remove the mirror trim, door-pull bolts, and panel screws. Lift the panel away, disconnect the lock switch, and release the latch rod.
Secure the glass and remove the regulator
Remove the support brace and peel back the water shield. Loosen the glass retainers, raise the glass, and tape it securely before unplugging and removing the regulator assembly.
Install the replacement regulator
Guide the new assembly into the door and secure its fasteners. Reconnect the motor, lower the glass into its clamps, and tighten the glass retainers evenly.
Test and reassemble
Operate the window through its travel and check that it moves without binding. Restore the water shield and brace, reconnect the lock switch and latch rod, and reinstall the panel and trim.
Check your vehicle’s repair manual for exact specifications and fit.