How to Replace Interior Door Handle 02-05 Nissan Altima
Difficulty: Beginner · About 35 min · Nissan Altima
Replace the interior door handle on a 2002–2005 Nissan Altima by removing the door panel, transferring the latch cables, and reconnecting switch and courtesy-light wiring.
Tools you will need
- Phillips screwdriver
- Flat blade screwdriver
- Trim panel tool
Parts and supplies
- Interior door handle
Steps
- Remove the door panel
Release the door-pull and handle covers, unplug the window switch and courtesy lamp, then remove the exposed Phillips screws. Free the panel clips, lift the panel away, and disconnect the latch and trunk-switch wiring.
- Remove the old handle
Unclip both latch cables from the handle. Remove the four Phillips screws from the panel's back and lift the handle out of its opening.
- Install the replacement handle
Position the new handle in the panel and reinstall its four Phillips screws. Reattach the latch cables to their matching retainers.
- Reassemble and test the door
Reconnect the trunk switch, courtesy lamp, and window harnesses. Hang the door panel and press its clips into place, reinstall screws and trim, then test the handle, lock, and switches.
Check your vehicle’s repair manual for exact specifications and fit.