How to Replace Interior Door Handle 02-06 GMC Envoy XL
Difficulty: Beginner · About 35 min · Gmc Envoy
Replace the interior door handle on a 2002–2006 GMC Envoy XL and reconnect the upper and lower latch rods.
Tools you will need
- Flat Blade Screwdriver
- Putty Knife
- 7mm Socket
- 10mm Socket
- Ratchet
Parts and supplies
- Interior door handle
Steps
Remove the door panel
Release the door pull trim and its fasteners, then work around the panel with a trim tool to free the clips. Lift the panel away, push the switch from its opening, disconnect its wiring, and peel back the water shield.
Remove the old handle
Remove the handle mounting bolt and slide the handle forward out of the panel. Unclip both the upper and lower latch rods from the handle, noting their positions.
Install the replacement handle
Attach the upper and lower latch rods to the replacement handle and confirm both clips are secure. Slide the handle into its mounting position and reinstall the retaining bolt.
Reinstall the panel and test
Restore the water shield, route the switch wiring through its opening, and hang the panel on the door. Press the clips home, reconnect the switch, reinstall the pull fasteners and trim, and test the handle and window switch.
Check your vehicle’s repair manual for exact specifications and fit.