How to Replace Headlight 05-06 Toyota Camry
Difficulty: Intermediate · About 45 min · Toyota Camry
Replace a headlight bulb or the full headlight assembly on a 2005-2006 Toyota Camry.
Tools you will need
- Flat blade screwdriver
- 10mm socket
- Ratchet
Parts and supplies
- Headlight bulb
- Headlight assembly
Steps
- Swap just the bulb if needed
Reach into the engine bay behind the headlight, twist and pull the old bulb out, unplug it, then plug in and twist the new one into place.
- Remove the old headlight assembly
Remove three 10mm bolts (two around that headlight, one near the opposite side), pry loose the bumper cover's center push clip and its wheel-well clips with a screwdriver, remove a fourth 10mm bolt now exposed at the headlight's bottom outer corner, then unplug the bulbs.
- Install the new assembly
Plug the harness into the new headlight, clip it into place, bolt it in with the 10mm socket (careful not to touch the bulb glass), then clip the bumper cover back on and refit the bolt near the opposite headlight.
Check your vehicle’s repair manual for exact specifications and fit.