How to Replace Radiator Fan Clutch 96-04 GMC Yukon
Difficulty: Intermediate · About 45 min · Gmc Yukon
Replace the radiator fan clutch on a 1996-2004 GMC Yukon.
Tools you will need
- Ratchet
- 8mm socket
- 10mm socket
- 13mm socket
- Adjustable wrench
- Hammer
- Flat blade screwdriver
- Torque wrench
Parts and supplies
- Radiator fan clutch
Steps
- Disconnect the battery
Disconnect the negative battery cable with an 8mm socket before working near the fan and shroud.
- Remove the air intake hose and fan shroud
Loosen the two hose clamps at the throttle body and air box and lift the intake hose assembly out, remove two 10mm bolts, move the upper radiator hose aside, then pull the shroud free.
- Remove the fan and swap the clutch
Hold the fan still and break its nut loose with a wrench and a few taps of a hammer, lift the fan off, then unbolt the four bolts on the back of the old clutch and bolt the new one on in its place.
- Reassemble
Refit the fan and hand-tighten its nut, then finish tightening it with the wrench and hammer trick, pin the shroud back in with its two 10mm bolts, and reconnect the upper radiator hose and air intake assembly.
Check your vehicle’s repair manual for exact specifications and fit.