How To Replace Door Lock Button 04-13 Nissan Titan

Difficulty: Beginner · About 45 min · Nissan Titan

Replace the manual door lock button on a 2004–2013 Nissan Titan by removing the door panel and releasing its retaining tabs.

Steps

1. Remove the door panel

   Pry off the trim at the inner handle and door pull, then remove the 10mm fasteners beneath them. Carefully release the window switch panel, unplug it, and lift the door trim from the sill.

2. Disconnect door panel fittings

   Unplug the courtesy lamp and detach the latch and lock cables from the panel. Set the panel on a protected surface so its trim and wiring are not strained.

3. Replace the lock button

   Release the locking tabs on the back of the manual lock button and push it out through the panel. Fit the replacement from the front and confirm its tabs hold it securely.

4. Refit the door panel

   Reconnect the lock and latch cables, courtesy lamp, and switch wiring. Hang the panel on the sill, press in its clips, reinstall the fasteners and trim, then test the lock button and door latch.

Check your vehicle’s repair manual for exact specifications and fit.