How to Replace Rear Wiper Arm 07-14 Chevrolet Suburban
Difficulty: Beginner · About 30 min · Chevrolet Suburban
Replace the rear wiper arm on a 2007–2014 Chevrolet Suburban, disconnecting and reconnecting the washer hose while positioning the arm on its spindle.
Tools you will need
- 13mm socket
- 19mm socket
- Ratchet
- Wiper arm puller
Parts and supplies
- Rear wiper arm
Steps
- Remove the arm cover and nut
Pull the cover from the wiper arm spindle and remove the 13mm retaining nut. Attach a wiper arm puller and use it to release the arm from the tapered spindle.
- Disconnect the washer hose
Lift the arm away and disconnect the washer fluid line. Keep the hose end clean and protected while the old arm is removed.
- Install the replacement arm
Position the new arm on the spindle in its parked orientation and reconnect the washer hose. Install the retaining nut and replace the protective cover.
- Test the wiper and washer
Operate the rear wiper and washer to confirm the arm sweeps and parks correctly and fluid reaches the glass. Check the hose connection for leaks.
Check your vehicle’s repair manual for exact specifications and fit.