How to Replace Windshield Wiper Transmission Linkage 94-97 Honda Accord
Difficulty: Intermediate · About 90 min · Honda Accord
Replace the windshield-wiper linkage on a 1994–1997 Honda Accord by removing the wiper arms and cowl panel. Mark the parked arm positions before disassembly and verify blade sweep and clearance before driving in rain.
Tools you will need
- 10mm socket
- 12mm socket
- Ratchet
- Flat blade screwdriver
- Phillips head screwdriver
Parts and supplies
- Windshield wiper linkage
Steps
Mark and remove the wiper arms
Set the wipers in their parked position and mark each arm's location on the glass with removable tape. Open the hood, remove the arm nuts, and lift the arms from their splines.
Remove the cowl and linkage
Release the cowl push clips and lift the panel back carefully. Remove the wiper motor fasteners, unplug its connector, and withdraw the motor and linkage together.
Transfer the motor to the new linkage
Unbolt the motor from the old linkage and mount it on the replacement in the same orientation. Secure the linkage, reconnect the wiring, and refit the cowl clips.
Set the arms and test the sweep
Align the wiper arms with the park marks and tighten their nuts to specification. Wet the windshield, test low and high speeds, and confirm blades do not hit the trim or each other.
Check your vehicle’s repair manual for exact specifications and fit.