How To Replace Taillight Assembly 03-12 Volvo XC90
Difficulty: Beginner · About 35 min · Volvo Xc90
Replace a rear taillight assembly on a 2003–2012 Volvo XC90 by opening the cargo-side trim, transferring the bulb holders, and checking the lamps afterward.
Tools you will need
- 10mm socket and ratchet
Parts and supplies
- Rear taillight assembly
Steps
- Expose the taillight fasteners
Remove the cargo floor clips and lift out the removable floor section. Take off the side floor trim and wall trim to expose the taillight bracket fasteners.
- Remove the old lamp
Remove the 10mm fasteners securing the taillight bracket. Pull the lamp straight out carefully, disconnecting its bulb holders as needed without twisting the wiring.
- Transfer the bulb holders
If the replacement housing does not include bulbs, rotate each bulb holder counterclockwise and remove it from the old lamp. Fit the holders into the new assembly and turn them clockwise to secure.
- Install the replacement lamp
Guide the new taillight into position and align the bracket holes with the vehicle. Reinstall and snug the 10mm fasteners, then refit the wall and floor trim and cargo floor.
- Check the rear lights
Switch on the parking lights and operate the brake, turn signal, and reverse lamps with help from an observer. Confirm each function works before driving.
Check your vehicle’s repair manual for exact specifications and fit.