How to Change Clutch Fluid 09-19 Nissan 370z
Difficulty: Advanced · About 75 min · Nissan 370z
Refresh the clutch hydraulic fluid on a 2009–2019 Nissan 370Z using the specified fluid and a helper. Keep the reservoir from running dry, bleed only from the designated slave-cylinder bleeder, and verify a firm clutch pedal and leak-free system.
Tools you will need
- Flat blade screwdriver
- 8mm wrench
- Rubber vacuum hose
- Cloth rags
- Assistant
Parts and supplies
- Clutch hydraulic fluid
Steps
Clean and empty the reservoir
Protect painted surfaces with rags, clean around the reservoir cap, and remove the old fluid with a clean suction tool. Do not introduce dirt or let fluid contact paint.
Refill with specified fluid
Add fresh fluid of the type required by the owner's manual, keeping the level above the minimum mark throughout bleeding. Do not mix fluids unless the specification permits it.
Bleed the clutch circuit
Attach a clear hose to the slave-cylinder bleeder and place its other end in a catch container. Have a helper press and hold the clutch while you open the bleeder, then close it before the pedal is released; repeat while maintaining reservoir level.
Close and check the system
When clean fluid exits without bubbles and the pedal feels firm, tighten the bleeder and refit its cap. Set the reservoir level, clean spills, and check for leaks before operating the vehicle.
Check your vehicle’s repair manual for exact specifications and fit.